##### **![https://www.rayzs.de/proantitab/assets/Banner8.png](https://www.rayzs.de/proantitab/assets/Banner8.png)** One of the simplest plugin & command hider! Decide what plugins and commands your players should see! ^^ **placeholderapi support - free - no dependencies required** ___________________________________ ************ # **A**BOUT ProAntiTab is an advanced **plugin hider** with **many features** and a very simple to understand system. It prevents your server from **plugin spoofers** used by hack clients, manipulates the **tab-completion**, blocks unwanted **suggestions** and much more! ##### # **I**N ACTION ![https://www.rayzs.de/proantitab/assets/beforeafter5.png](https://www.rayzs.de/proantitab/assets/beforeafter5.png) *Command like "**minecraft:xxx**" or "**plugin:xxx**" are blocked automatically!* ###### # **C**OSTUM SERVER BRAND (F3) Create your own animated custom server brand on your Spigot, Bungeecord and Velocity server! *![https://www.rayzs.de/proantitab/assets/csbr.gif](https://www.rayzs.de/proantitab/assets/csbr.gif)![https://www.rayzs.de/proantitab/assets/edc.gif](https://www.rayzs.de/proantitab/assets/edc.gif)*

open config.yml section

```yaml # This feature allows you to customize your server-brand you see when you press F3. # Normally there stands something like 'Purpur', or 'Spigot'. # With this feature you are able to change and even animate it! ^^ custom-server-brand: enabled: false # Determines the speed in that the animation goes repeat-delay: 3 # This here is the list of the animation # Possible placeholders: # %player% - name of the player # %displayname% - displayname of the player # %world% - name of world where the player is # and the other placeholders from PlaceholderAPI brands: - '&f&lP&froAntiTab |' - '&fP&lr&foAntiTab /' - '&fPr&lo&fAntiTab -' - '&fPro&lA&fntiTab |' - '&fProA&ln&ftiTab \' - '&fProAn<&fiTab |' - '&fProAnt&li&fTab /' - '&fProAnti&lT&fab -' - '&fProAnti&lT&fab \' - '&fProAntiT&la&fb |' - '&fProAntiTa&lb&f /' - '&fProAntiTab -' - '&fProAntiTab \' ```

###### # **U**SE BLACKLIST AS WHITELIST You have way too many commands to block? Don't worry. There's a section in the config.yml located pretty much high that allows you to turn the blacklist into a whitelist instead. This will block every command on your server except for those that are listed.

section in config.yml

```yaml # This is a very necessary feature if you have way too many commands to block and instead decide # to whitelist specific commands. # Enabling this will disable ALL commands except for those that are in the (group-)list. turn-blacklist-to-whitelist: false ```

###### # **A**NTI PLUGIN SPOOFING ##### ProAntiTab is able to detect and block plugin spoofing attempts used by hack clients. *![https://www.rayzs.de/proantitab/assets/noplspoof.png](https://www.rayzs.de/proantitab/assets/noplspoof.png)* ###### # **B**LOCK COLLON COMMANDS It's annyoing after some time to block all commands including collons like essentials:spawn. With this option you can disable them entirely for good! Only people with the proantitab.namespace permission can see these commands again. ![https://www.rayzs.de/proantitab/assets/namespace.png](https://www.rayzs.de/proantitab/assets/namespace.png)

open config.yml section

```yaml #>> HTP (Overwritten) # Here you can disable all namespace commands. # Namespace commands are commands like plugin:command (e.g: essentials:warp) # You can bypass this restriction with the proantitab.namespace permission. block-namespace-commands: enabled: false ```

##### # **C**OSTUM PLUGINS LIST Just blocking the /plugins command is pretty boring after some time. This feature here allows you to make it more interesting by faking a /plugins message with, for example, fake plugins! ^^ ![https://www.rayzs.de/proantitab/assets/fakeplugins2.PNG](https://www.rayzs.de/proantitab/assets/fakeplugins2.PNG)

open config.yml section

```yaml #>> HTP (Overwritten) # Here you can customize your own fake '/plugins' command. custom-plugins: enabled: true commands: - pl - plugins - bukkit:pl - bukkit:plugins message: - '&fPlugins (0):' ```

###### # **C**OSTUM VERSION COMMAND Who wouldn't like to pretend to own a custom server-jar? Have fun customizing your very own /version command to your personal liking. ^^ ![https://www.rayzs.de/proantitab/assets/custom-version.png](https://www.rayzs.de/proantitab/assets/custom-version.png)

open config.yml section

```yaml #>> HTP (Overwritten) # Here you can customize your own fake '/version' command. custom-version: enabled: true commands: - version - ver - icanhasbukkit - bukkit:ver - bukkit:version message: - '&fThis server is running CraftBukkit version git-NasaSpigot-294 (MC: X)' ```

###### # **C**OSTUM UNKNOWN COMMAND MESSAGE The Bukkit/Spigot version of ProAntiTab gives your the possibility to create your own unknown-command message to align it with the blocked-command message for example. ![https://www.rayzs.de/proantitab/assets/customunknowncommand.PNG](https://www.rayzs.de/proantitab/assets/customunknowncommand.PNG)

open config.yml section

```yaml # Now there we come to the good stuff! ^^ # If ProAntiTab is loaded on a Spigot server, you will see this option right here. # With that you can also customize your own "Unknown Command"-message. custom-unknown-command: enabled: true message: - '&cThis command does not exist!' ```

###### # **C**USTOM PROTOCOL PING Do you know the red text message at the players count when you ping a server with the wrong version? Exactly this holds the information of what kind of server your proxy server is running at. This feature hides the version of the proxy with a custom made one. It's enabled by default but doesn't show the text. The text can be seen when someone pings the server with the wrong version or uses a resolver. This picture shows you what someone with the wrong version would see, unless the "always-show" is enabled. If this option is enabled, this text will always appear. ![https://www.rayzs.de/proantitab/assets/custom-protol-ping.png](https://www.rayzs.de/proantitab/assets/custom-protol-ping.png)

open config.yml section

```yaml # Change the protocol for the version name when the server is being pinged custom-protocol-ping: enabled: true # Normally it would only display when someone pings the server with the wrong version. # Enabling this will always display the protocol and replace it with the normal player count. always-show: false # The displayed protocol message # Available placeholders: # %online% - current online player count # %max% - max player count protocol: '&f&lProAntiTab &7(&a%online%&7/&c%max%&7)' ```

###### # **B**LOCK ON SPECIFIC SERVERS You have a whole network where on one server a certain command should be blocked and on another one not? ProAntiTab offers you the possibility to connect your backend servers with your proxy server through ProAntitab. How it works exactly is shown on the documenation page at the very first section "[**H**OW TO SETUP?](https://www.spigotmc.org/resources/113172/field?field=documentation)". This gives ProAntiTab the ability to specify on which servers a certain command should work or not. You can either allow one command on all lobby servers, or block a certain command on one server only. ###### # **G**ROUP SYSYTEM This unique system allows you to put certain blocked commands into a group. All players who are in this group are able to bypass the system in order to execute the command that is listed in this group. *[Check out the documentation to get a more detailed explaination!](https://www.spigotmc.org/resources/113172/field?field=documentation)* ###### # **P**LACEHOLDERAPI & PAPIPROXYBRIDGE SUPPORT Customization and uniqueness is an important factor for many server owners. That's why PAT offers you the possebility to edit and use many of its placeholders with the widely spreaded plugin [PlaceholderAPI](https://www.spigotmc.org/resources/6245/). Accessing those placeholders on the proxy isn't a problem either. With the support of the addtional plugin [PAPIProxyBridge](https://www.spigotmc.org/resources/108415/), PAT's placeholders are even accessable on your proxy server.

Available placeholders

```yaml # Some general Placeholders to work with: # %pat_general_user% = Get the name of the user who receives this message. # %pat_general_version_current% = Get current version name of PAT. # %pat_general_version_newest% = Get newest version name of PAT. # Placeholders of some of the messages in the config.yml: # %pat_message_unknowncommand% = Get the "unknown command"-message from the config.yml of PAT. [cancel-blocked-command] # %pat_message_blocked% = Get the "command blocked"-message from the config.yml of PAT. [custom-unknown-command] # Placeholders to list all commands: # %pat_list_size_commands% = Get the amount of all listed commands. # %pat_list_commands% = Get all listed commands. # %pat_list_sorted_commands% = Get all listed commands in alphabetic order. (A-Z) # %pat_list_reversed_groups% = Get all listed commands in reversed alphabetic order. (Z-A) # Placeholders to list all commands of a group: (replace 'xxx' with the group-name) # %pat_list_size_commands_group_xxx% = Get the amount of all commands of a group. # %pat_list_commands_group_xxx% = Get all commands of a group. # %pat_list_sorted_commands_group_xxx% = Get all commands of a group in alphabetic order. (A-Z) # %pat_list_reversed_commands_group_xxx% = Get all commands of a group in reversed alphabetic order. (Z-A) # Placeholders to list all groups: # %pat_list_size_groups% = Get the amount of all available groups. # %pat_list_groups% = Get all groups. # %pat_list_sorted_groups% = Get all groups in alphabetic order. (A-Z) # %pat_list_reversed_groups% = Get all groups in reversed alphabetic order. (Z-A) ```

### # **M**INIMESSAGE SUPPORT ## ![https://www.rayzs.de/proantitab/assets/possibilites.png](https://www.rayzs.de/proantitab/assets/possibilites.png) ##### You want to design your messages more unique? We got you covered! *(works on 1.17 server and above)* *([Click here to see the documentation for the format](https://docs.advntr.dev/minimessage/format.html#)*) Look at those few examples to see what kind of possibilities awaits you:

example 1

```yaml cancel-blocked-commands: enabled: true message: '&cThis command is &4&lBLOCKED&c!' ``` ![https://www.rayzs.de/proantitab/assets/example1.png](https://www.rayzs.de/proantitab/assets/example1.png)

example 2

```yaml cancel-blocked-commands: enabled: true message: '&cThis command is blocked! &7Click here to get a view of all available commands instead.' ``` ![https://www.rayzs.de/proantitab/assets/example2.png](https://www.rayzs.de/proantitab/assets/example2.png)

###### # **H**OW TO SETUP? Despite of the fact that ProAntiTab is pretty easy to use, the setup is slidely different for each server engine. Please check out the documentation for that and open the spoiler that matches to your server scenario. *[**H**OW TO SETUP?](https://www.spigotmc.org/resources/113172/field?field=documentation)* **Please feel free to join the [Discord](https://www.rayzs.de/discord) server to request for help if the instruction is unclear or too complicated. ^^** # # **H**OW TO ALLOW COMMANDS? *Following permission is required to execute a blocked command: **proantitab.bypass.xx** Following permission is required to execute all blocked commands:* **proantitab.bypass** Following permission is required to execute all listed commands within a certain group: **proantitab.group.xx** ###### # **C**OMMANDS & PERMISSIONS All commands and their permissions are listed on the [documentation](https://www.spigotmc.org/resources/113172/field?field=documentation) page at the very buttom. ###### # **C**ONFIGURATION FILE

bukkit/spigot

config.yml

```yaml # ____ ___ __ _ ______ __ # / __ \_________ / | ____ / /_(_)_ __/___ _/ /_ # / /_/ / ___/ __ \/ /| | / __ \/ __/ / / / / __ `/ __ \ # / ____/ / / /_/ / ___ |/ / / / /_/ / / / / /_/ / /_/ / # /_/ /_/ \____/_/ |_/_/ /_/\__/_/ /_/ \__,_/_.___/ # config.yml (Bukkit/Spigot version) # This section doesn't really need to be changed, # but a few people seem not to like my design for a custom update-notification message... # Well... that's basically the whole reason for this one here. xd updater: enabled: true period: 10000 updated: - '&8[&2PAT &7| &2Bukkit&8] &aYou are using the newest version! ^^' outdated: - '&8[&4PAT &7| &4Bukkit&8] &cThere is a new version available! (%newest_version%)' - '&8[&4PAT &7| &4Bukkit&8] &cYou are still using the %current_version%.' - '&8[&4PAT &7| &4Bukkit&8] &cGet the newest version here:' - '&8[&4PAT &7| &4Bukkit&8] &ehttps://www.rayzs.de/products/proantitab/page' # (!) Warning: If you have a Bungeecord/Velocity server, please enable this option! # (!) How to use it properly can be seen on the following page: # (!) https://www.spigotmc.org/resources/113172/field?field=documentation # (!) At the first section ("How to setup") are spoilers with different server scenarios. # (!) Open the spoiler that matches your server scenario and follow the instructed steps in there. # Enabling this allows the Bungeecord/Velocity and backend servers to communicate with each other. # Information that are being communicated with are for example settings of certain features, but also important # data about groups, commands and much more, that are very important for the tab-completion & suggestions! # Affected features that are being synced with, or overwritten by the proxy, are marked as ">> HTP". handle-through-proxy: enabled: false token: insert-token-of-proxy-here #>> HTP # This is a very necessary feature if you have way too many commands to block and instead decide # to whitelist specific commands. # Enabling this will disable ALL commands except for those that are in the (group-)list. turn-blacklist-to-whitelist: true # Here you can customize the server version that is displayed on a ping. (The text at the player-count) # (!) Warning: It's required to use Paper or Purpur to use this feature! # (!) Supported server versions: 1.12.2 - latest custom-protocol-ping: enabled: false # Normally it would only display when someone pings the server with the wrong version. # Enabling this will always display the protocol and replace it with the normal player count. always-show: false # This number here determines the outcome for the %online_extended% placeholder. # It's the current amount of players increased by this number. # For example: 5/20 becomes 6/20 extend-online-count: 1 # true: Use new calculated online-count (%online_extended%) as max-players count. # false: Use the default max-players count. use-as-maxplayers: false # Enabling this option hides the list of players on your server, # when you hover over the player count. hide-players: true # The displayed protocol message # Available placeholders: # %online% - current online player count # %online_extended% - manipulated online player count # %max% - max player count protocol: '&f&lProAntiTab &7(&a%online%&7/&c%max%&7)' #>> HTP (Sync) # This feature allows you to create your own 'Unknown command.' message. # It is very helpful considering the fact you might have to set the same message # for if a command is blocked or really doesn't exist. ^^ # Good to hide real and not-real commands from your players. custom-unknown-command: # This is the list of the animation # Possible placeholders: # %player% - name of the player # %displayname% - display name of the player # %world% - name of the world where the player is # and the other placeholders from PlaceholderAPI. brands: - '&f&lP&froAntiTab |' - '&fP&lr&foAntiTab /' - '&fPr&lo&fAntiTab -' - '&fPro&lA&fntiTab |' - '&fProA&ln&ftiTab \' - '&fProAn<&fiTab |' - '&fProAnt&li&fTab /' - '&fProAnti&lT&fab -' - '&fProAnti&lT&fab \' - '&fProAntiT&la&fb |' - '&fProAntiTa&lb&f /' - '&fProAntiTab -' - '&fProAntiTab \' # ------------------------------------------------------------------------------ # __ ___ # / |/ /__ ______________ _____ ____ _____ # / /|_/ / _ \/ ___/ ___/ __ `/ __ `/ _ \/ ___/ # / / / / __(__ |__ ) /_/ / /_/ / __(__ ) # /_/ /_/\___/____/____/\__,_/\__, /\___/____/ # /____/ # Here are all the remaining messages for the InGame commands. # Have fun editing them to your liking! ^^ # Remember: PlaceholderAPI & MiniMessage works on all these messages! ^^ # Here are a few other placeholders that can be used in any message here: # %prefix% - the plugin prefix # %executor% - the name of the executor (command specified) # %newest_version% - the version name of the latest plugin update # %current_version% - the version name of the plugin that is installed right now prefix: '&8[&4ProAntiTab&8]' only-for-proxy: '&cThis command works on Bungeecord/Velocity servers only!' no-permissions: '&cYou are not allowed to execute this command! Missing permission: &4%permission%' command-failed: '&cFailed to execute this command! Use "/pat" to see all available commands.' update-permissions: all-players: '&aUpdated permissions!' specific-player: '&aUpdated %target%''s permissions!' player-not-online: '&c%target% is not online!' post-debug: success: '&aSuccessfully uploaded debug logs: &e%link% &8(CLICK&8)' failed: '&cFailed to upload debug logs!' reload: loading: '&eReloading all configuration files...' done: '&aSuccessfully reloaded all configuration files!' help: - '&7Available commands are: &f/%label%&7... &8[&fBUKKIT&8]' - '&7Format: &8 (required)' - '&f reload &7to reload the plugin' - '&f notify &7to get alerted' - '&f info &7to get a few information' - '&f postdebug &7to post the PAT logs' - '&f update &7to update player(s) permissions' - '&f add/rem (command) &8 &7to manage the list' - '&f clear &8 &7to clear the list' - '&f creategroup (group) &7to create a group' - '&f deletegroup (group) &7to delete a group' - '&f setpriority (group) (priority) &7to set the priority' - '&f list &8(group) &7to see all listed commands' - '&f listgroups &7List all groups' - '&f listpriorities &7to list all group priorities' info: version: updated: '&aUpdated' outdated: '&cOutdated (%newest_version%)' proxy-sync: time: '&e%time%' disabled: '&cDisabled!' message: - '&7Necessary information about &fPAT&8:' - '&7 Version: &e%current_version%' - '&7 Status: %version_status%' - '&7 Last sync with proxy: %sync_time%' - '&7 Proxy sync-token: &e%token%' - '&7 Proxy-received server name: &e%sync_server_name%' notification: enabled: '&aEnabled notifications' disabled: '&cDisabled notifications' alert: - '&8[&4ALERT&8] &c%player% &8(&7world: &e%world%&8) &ctried to execute the following blocked command: &4%command%' blacklist: clear: '&aList has been cleared!' clear-confirmation: '&4Warning! &7This command will &cclear the entire list&7! &7Repeat the &esame command &7to confirm this action.' list: message: '&7Listed commands (&f%size%&7)&8: &f%commands%' splitter: '&7, ' command: '&f%command%' add: success: '&aSuccessfully added %command% to the list!' failed: '&c%command% is already in the list!' remove: success: '&aSuccessfully removed %command% from the list!' failed: '&c%command% is not listed!' group: create: '&aGroup %group% has been created!' already-exist: '&cGroup %group% already exists!' does-not-exist: '&cGroup %group% does not exist!' delete: '&cGroup %group% has been deleted!' delete-confirmation: '&4Warning! &7This command will &cdelete the group with the entire list&7 of this group! &7Repeat the &esame command &7to confirm this action.' clear: '&aList of group %group% has been cleared!' clear-confirmation: '&4Warning! &7This command will &cclear the entire list&7 of this group! &7Repeat the &esame command &7to confirm this action.' priority: success: '&aSuccessfully set the priority of group &e%group% &ato &e%priority%&a!' failed: '&cInvalid priority! Please choose a number which is greater than 0.' list: message: '&7Listed commands of group %group% (&f%size%&7)&8: &f%commands%' splitter: '&7, ' command: '&f%command%' list-groups: message: '&7All groups (&f%size%&7)&8: &f%groups%' splitter: '&7, ' command: '&f%group%' list-priorities: message: '&7List of all group priorities (&f%size%&7)&8: \n&f%groups%' splitter: '\n' group: '&8- &e%priority%&8: &f%group%' add: success: '&aSuccessfully added %command% to the list of group %group%!' failed: '&c%command% is already in the list of group %group%!' remove: success: '&aSuccessfully removed %command% from the list of group %group%!' failed: '&c%command% is not listed in the group %group%!' ```

storage.yml

```yaml global: commands: - pl - plugins - ver - version - icanhasbukkit groups: examplegroup: priority: 1 commands: - tell - msg ```

bungeecord/velocity

config.yml

```yaml # ____ ___ __ _ ______ __ # / __ \_________ / | ____ / /_(_)_ __/___ _/ /_ # / /_/ / ___/ __ \/ /| | / __ \/ __/ / / / / __ `/ __ \ # / ____/ / / /_/ / ___ |/ / / / /_/ / / / / /_/ / /_/ / # /_/ /_/ \____/_/ |_/_/ /_/\__/_/ /_/ \__,_/_.___/ # config.yml (Proxy version) # This section doesn't really need to be changed, # but a few people seem not to like my design for a custom update-notification message... # Well... that's basically the whole reason for this one here. xd updater: enabled: true period: 10000 updated: - '&8[&2PAT &7| &2Proxy&8] &aYou are using the newest version! ^^' outdated: - '&8[&4PAT &7| &4Proxy&8] &cThere is a new version available! (%newest_version%)' - '&8[&4PAT &7| &4Proxy&8] &cYou are still using the %current_version%.' - '&8[&4PAT &7| &4Proxy&8] &cGet the newest version here:' - '&8[&4PAT &7| &4Proxy&8] &ehttps://www.rayzs.de/products/proantitab/page' # This is a very necessary feature if you have way too many commands to block and instead decide # to whitelist specific commands. # Enabling this will disable ALL commands except for those that are in the (group-)list. turn-blacklist-to-whitelist: true # Here you can customize the server version that is displayed on a ping. (The text at the player-count) custom-protocol-ping: enabled: true # Normally it would only display when someone pings the server with the wrong version. # Enabling this will always display the protocol and replace it with the normal player count. always-show: false # This number here determines the outcome for the %online_extended% placeholder. # It's the current amount of players increased by this number. # For example: 5/20 becomes 6/20 extend-online-count: 1 # true: Use new calculated online-count (%online_extended%) as max-players count. # false: Use the default max-players count. use-as-maxplayers: false # The displayed protocol message # Available placeholders: # %online% - current online player count # %online_extended% - manipulated online player count # %max% - max player count protocol: '&f&lProAntiTab &7(&a%online%&7/&c%max%&7)' # This feature allows you to create your own 'Unknown command.' message. # It is very helpful considering the fact you might have to set the same message # for if a command is blocked or really doesn't exist. ^^ # Good to hide real and not-real commands from your players. # (!) Warning: This feature only works if PAT is installed on the backend server as well. # (!) The following page shows you how to setup PAT on the backend servers as well: # (!) https://www.spigotmc.org/resources/113172/field?field=documentation # (!) At the first section ("How to setup") are spoilers with different server scenarios. # (!) Open the spoiler that matches your server scenario and follow the instructed steps in there. custom-unknown-command: enabled: false message: - '&cThis command does not exist!' # This setting decides if a listed command should be cancelled from execution or not. # As you can see it's enabled by default, which is also why every command that is listed # is being blocked entirely. cancel-blocked-commands: enabled: true message: - '%prefix% &cThis command &8(&4%command%&8) &cis blocked!' # Here you can customize your own fake '/plugins' command. custom-plugins: enabled: true commands: reload: loading: '&eReloading all configuration files...' done: '&aSuccessfully reloaded all configuration files!' help: - '&7Available commands are: &f/%label%&7... &8[&fPROXY&8]' - '&7Format: &8 (required)' - '&f reload &7to reload the plugin' - '&f notify &7to get alerted' - '&f info &7to get a few information' - '&f postdebug &7to post the PAT logs' - '&f update &7to update player(s) permissions' - '&f add/rem (command) &8 &7to manage the list' - '&f clear &8 &7to clear the list' - '&f creategroup (group) &7to create a group' - '&f deletegroup (group) &7to delete a group' - '&f setpriority (group) (priority) &7to set the priority' - '&f list &8 &7to see all listed commands' - '&f listgroups &8 &7List all groups' - '&f listpriorities &7to list all group priorities' - '&7 For a specific server:' - '&f serv list (server) &8' - '&f serv add/rem (server) (command) &8 ' - '&f serv clear (server) &8' info: version: updated: '&aUpdated' outdated: '&cOutdated (%newest_version%)' proxy-sync: time: '&e%time%' disabled: '&cDisabled!' message: - '&7Necessary information about &fPAT&8:' - '&7 Version: &e%current_version%' - '&7 Status: %version_status%' - '&7 Last sync: %sync_time%' - '&7 Proxy sync-token: &e%token%' stats: fail: '&cThis command works on Bungeecord/Velocity servers only!' no-server: '&cNone!' message: splitter: '&7, ' server: '&f%servername% &8(%updated%)' statistic: - '&7Last sync sent to &f%server_count% &7servers. &8&o(%last_sync_time% ago)' - '&7Sent to servers: &f%servers%' server-list: server-not-found: '&cThe server %server% does not have any commands!' group-does-not-exist: '&cGroup %group% does not exist for %server%!' list: server: message: '&7Listed commands of %server% (&f%size%&7)&8: &f%commands%' splitter: '&7, ' command: '&f%command%' group: message: '&7Listed commands of %group% from %server% (&f%size%&7)&8: &f%commands%' splitter: '&7, ' command: '&f%command%' blacklist: clear: '&aList has been cleared!' clear-server: '&aList has been cleared for the server %server%!' clear-server-not-found: '&cThe server %server% does not have any commands!' clear-confirmation: '&4Warning! &7This command will &cclear the entire list&7! &7Repeat the &esame command &7to confirm this action.' clear-confirmation-server: '&4Warning! &7This command will &cclear the entire list of this server&7! &7Repeat the &esame command &7to confirm this action.' list: message: '&7Listed commands (&f%size%&7)&8: &f%commands%' splitter: '&7, ' command: '&f%command%' message-server: '&7Listed commands of %server% (&f%size%&7)&8: &f%commands%' splitter-server: '&7, ' command-server: '&f%command%' add: success: '&aSuccessfully added %command% to the list!' failed: '&c%command% is already in the list!' success-server: '&aSuccessfully added %command% to the list of %server%!' failed-server: '&c%command% is already in the list of %server%!' remove: success: '&aSuccessfully removed %command% from the list!' failed: '&c%command% is not listed!' success-server: '&aSuccessfully removed %command% from the list of %server%!' failed-server: '&c%command% is not in the list of %server%!' group: create: '&aGroup %group% has been created!' already-exist: '&cGroup %group% already exists!' does-not-exist: '&cGroup %group% does not exist!' delete: '&cGroup %group% has been deleted!' delete-confirmation: '&4Warning! &7This command will &cdelete the group with the entire list&7 of this group! &7Repeat the &esame command &7to confirm this action.' clear: '&aList of group %group% has been cleared!' clear-confirmation: '&4Warning! &7This command will &cclear the entire list&7 of this group! &7Repeat the &esame command &7to confirm this action.' create-server: '&aGroup %group% for %server% has been created!' already-exist-server: '&cGroup %group% for %server% already exists!' does-not-exist-server: '&cGroup %group% of %server% does not exist!' delete-server: '&cGroup %group% of %server% has been deleted!' delete-confirmation-server: '&4Warning! &7This command will &cdelete the group of the server %server% with the entire list&7 of this group! &7Repeat the &esame command &7to confirm this action.' clear-server: '&aList of group %group% from %server% has been cleared!' clear-confirmation-server: '&4Warning! &7This command will &cclear the entire list&7 of this group for %server%! &7Repeat the &esame command &7to confirm this action.' priority: success: '&aSuccessfully set the priority of group &e%group% &ato &e%priority%&a!' failed: '&cInvalid priority! Please choose a number which is greater than 0.' list: message: '&7Listed commands of group %group% (&f%size%&7)&8: &f%commands%' splitter: '&7, ' command: '&f%command%' message-server: '&7Listed commands of group %group% from %server% (&f%size%&7)&8: &f%commands%' splitter-server: '&7, ' command-server: '&f%command%' list-groups: message: '&7All groups (&f%size%&7)&8: &f%groups%' splitter: '&7, ' command: '&f%group%' message-server: '&7All groups from %server% (&f%size%&7)&8: &f%groups%' splitter-server: '&7, ' command-server: '&f%group%' list-priorities: message: '&7List of all group priorities (&f%size%&7)&8: \n&f%groups%' splitter: '\n' group: '&8- &e%priority%&8: &f%group%' add: success: '&aSuccessfully added %command% to the list of group %group%!' failed: '&c%command% is already in the list of group %group%!' success-server: '&aSuccessfully added %command% to the list of group %group% for %server%!' failed-server: '&c%command% is already in the list of group %group% of %server%!' remove: success: '&aSuccessfully removed %command% from the list of group %group%!' failed: '&c%command% is not listed in the group %group%!' success-server: '&aSuccessfully removed %command% from the list of group %group% from %server%!' failed-server: '&c%command% is not listed in the group %group% of %server%!' ```

storage.yml

```yaml global: commands: - hub - pl - plugins - ver - version - icanhasbukkit ignored-servers: - auth-* servers: lobby-*: commands: - spawn faction-1: commands: - kit groups: examplegroup: priority: 1 commands: - tell - msg servers: lobby-*: commands: - cosmetics factions-1: commands: - premiumkit ```

###### ## **bStats** [![https://bstats.org/signatures/bukkit/ProAntiTab%20-%20Spigot.svg](https://bstats.org/signatures/bukkit/ProAntiTab%20-%20Spigot.svg)](https://bstats.org/plugin/bukkit/proantitab%20-%20spigot/20089) [![https://bstats.org/signatures/bungeecord/ProAntiTab%20-%20Bungeecord.svg](https://bstats.org/signatures/bungeecord/ProAntiTab%20-%20Bungeecord.svg)](https://bstats.org/plugin/bungeecord/proantitab%20-%20bungeecord/20090) ### **[![https://bstats.org/signatures/velocity/ProAntiTab%20-%20Velocity.svg](https://bstats.org/signatures/velocity/ProAntiTab%20-%20Velocity.svg)](https://bstats.org/plugin/velocity/proantitab%20-%20velocity/21638)** # [![https://www.rayzs.de/rayzsshield/assets/support.png](https://www.rayzs.de/rayzsshield/assets/support.png)](https://www.rayzs.de/discord)

Published on	October 9, 2024
Downloads	25

ProAntiTab

Release 1.8.2-HOTFIX

Alihan released ProAntiTab version 1.8.2-HOTFIX on October 9, 2024

Information

Platforms

Dependencies

Release
1.8.2-HOTFIX